TWRNINT=0, BIT1ERR=0, FLTCONF=00, CRCERR=0, STFERR=0, TXWRN=0, BOFFINT=0, BIT0ERR=0, ERRINT=0, RX=0, FRMERR=0, TX=0, ACKERR=0, RWRNINT=0, RXWRN=0, WAKINT=0, IDLE=0, SYNCH=0
Error and Status 1 Register
| WAKINT | Wake-Up Interrupt 0 (0): No such occurrence 1 (1): Indicates a recessive to dominant transition was received on the CAN bus |
| ERRINT | Error Interrupt 0 (0): No such occurrence 1 (1): Indicates setting of any Error Bit in the Error and Status Register |
| BOFFINT | ‘Bus Off’ Interrupt 0 (0): No such occurrence 1 (1): FlexCAN module entered ‘Bus Off’ state |
| RX | FlexCAN in Reception 0 (0): FlexCAN is not receiving a message. 1 (1): FlexCAN is receiving a message. |
| FLTCONF | Fault Confinement State 0 (00): Error Active 1 (01): Error Passive 2 (1x): Bus Off |
| TX | FlexCAN in Transmission 0 (0): FlexCAN is not transmitting a message. 1 (1): FlexCAN is transmitting a message. |
| IDLE | no description available 0 (0): No such occurrence 1 (1): CAN bus is now IDLE. |
| RXWRN | Rx Error Warning 0 (0): No such occurrence 1 (1): RXERRCNT is greater than or equal to 96. |
| TXWRN | TX Error Warning 0 (0): No such occurrence 1 (1): TXERRCNT is greater than or equal to 96. |
| STFERR | Stuffing Error 0 (0): No such occurrence 1 (1): A Stuffing Error occurred since last read of this register. |
| FRMERR | Form Error 0 (0): No such occurrence 1 (1): A Form Error occurred since last read of this register. |
| CRCERR | Cyclic Redundancy Check Error 0 (0): No such occurrence 1 (1): A CRC error occurred since last read of this register. |
| ACKERR | Acknowledge Error 0 (0): No such occurrence 1 (1): An ACK error occurred since last read of this register. |
| BIT0ERR | Bit0 Error 0 (0): No such occurrence 1 (1): At least one bit sent as dominant is received as recessive. |
| BIT1ERR | Bit1 Error 0 (0): No such occurrence 1 (1): At least one bit sent as recessive is received as dominant. |
| RWRNINT | Rx Warning Interrupt Flag 0 (0): No such occurrence 1 (1): The Rx error counter transitioned from less than 96 to greater than or equal to 96. |
| TWRNINT | Tx Warning Interrupt Flag 0 (0): No such occurrence 1 (1): The Tx error counter transitioned from less than 96 to greater than or equal to 96. |
| SYNCH | CAN Synchronization Status 0 (0): FlexCAN is not synchronized to the CAN bus. 1 (1): FlexCAN is synchronized to the CAN bus. |